What are the advantages of going in for a ceiling hugging fan? As the name suggests, the gap between the ceiling and the blades of the fan will be very less. The most obvious reason why one would go in for such a fan is if there is very little clearance between the ceiling and the floor.
Safety records tell us that there should be at least a gap of 7 feet between the ceiling fan and the floor. However, if you are a person of average height - say 5.5 inches and if you jump very hard and if you stretch your hand, you will easily cover the remaining 1 ½ feet and can easily come in contact with the fan.
CEILING FANS
If you are not conscious of the presence of the fan operating overhead, there is a possibility of injuring your fingers badly. In such a scenario, if the actual gap between the roof and the base is not more than 7 feet, then you can not opt for the standard ceiling fan. You will have to go in for a fan that is situated very close to the ceiling.
The most commonly used type of such ceiling fans are those with shortened blades. The overall reach of the fan comes down but the power increases as the capacity of the motor used remains the same. In such a scenario, the increased power ensures that the reduction in the length of the blades is compensated and that air is thrown over a long distance.
Of course, it is advisable to have an alternate source of ventilation when you have installed such ceiling fans in the room. This is because there is a possibility of insufficient ventilation.
The ceiling fan operates where pushing the air from the ceiling to the floor at high speed. If the gap is very less, there is a possibility of very little air being pushed down. By providing for an alternate source of ventilation, you can make sure there is proper circulation of air and that the fan functions properly.
You can get more information about the features and the characteristics of different low ceiling fans on the internet. You can also read ahead and find out why it is important to opt for those fans with a smaller blade. This is because the speed of rotation may easily force the blades to swing and wobble and come in contact with the ceiling at high speeds.
Ceiling Hugging Fan - Some Benefits And Features Explained CEILING FANS
No comments:
Post a Comment